uploading files

readme.md

@@ -0,0 +1,48 @@
+#### WIND MESS ANLAGE BY NETWEBSYSTEMS® 
+##### BASIC INSTRUCTIONS FOR INSTALLATION FOR BEAGLEBONE
+
+###### 1. PREPARE BEAGLEBONE:
+*    1.1 INSTALL O.S.
+*    1.2 CONNECT THROUGH SSH (192.168.7.2)\
+       - SSH password: Netweb4ever!
+*    1.3 CONNECT TO WIFI
+*    1.4 USE IFCONFIG TO CHECK IP AND USE THIS IP TO ACCESS REMOTELY
+*    1.5 INSTALL 'minimalmodbus' and 'paho-mqtt' libraries WITH -H\
+        sudo -H pip3 install minimalmodbus paho-mqtt
+###### 2. PREPARE THE SENSOR:
+*    2.1 OPEN THIES DEVICE UTILITY
+*    2.2 LOG AS ADMIN KY04711, CS1
+*    2.3 CHANGE DUPLEX MODUS AND WIRING
+*    2.4 SET TIME ZONE (TZ26) AND DAILY TIME UPDATE(RT03)
+*    2.5 CHANGE TO MODBUS RTU INTERPRETER IN THE THIES DEVICE UTILITY
+*    2.6 CONNECT THE SENSOR TO THE BEAGLEBONE (BR & YE = A, GR & WH = B, GRAY = GND)
+###### 3. INSTALL THE SOFTWARE IN THE BEAGLEBONE
+*    3.1 CLONE THE GIT REPOSITORY\
+       $ git clone http://git.strawhat-solutions.de/NetWEB/Windmessanlage.git 
+*    3.2 CREATE THE WORKING DIRECTORY AND COPY FILES:
+*    3.3 EDIT THE CONFIG.INI FILE
+
+###### 4. SET SERVICE AUTO-START
+*    4.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY\
+       $ sudo cp /var/lib/cloud9/Windmessanlage/Software/Sensor/wma.service /lib/systemd/ 
+*    4.2 CREATE A SYMLINK in the /etc/systemd/system/ directory \
+       $ sudo ln -s /lib/systemd/wma.service /etc/systemd/system/wma.service 
+*    4.3 RELOAD DAEMON, ENABLE AND START THE SERVICE
+
+###### 2. PREPARE DISPLAY:
+
+* 1.1 POWER UP DISPLAY\
+     Connect the +24 and GND Wires to power up the Display
+* 1.2 INSTALL 'pygame' and 'paho-mqtt' libraries WITH -H
+* 1.3 CREATE CHANGE TO THE WORKING DIRECTORY\
+    $ sudo mkdir /home/pi/WMA/\
+    $ cd /home/pi/WMA/
+* 2.2 CLONE THE GIT REPOSITORY
+* 2.3 EDIT THE CONFIG.INI FILE FOR THE APPLICATION\
+    $ sudo nano /home/pi/WMA/Windmessanlage/Display/config.ini 
+    
+###### 3. SET SERVICE AUTO-START
+
+* 3.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY\
+    $ sudo cp /home/pi/WMA/Windmessanlage/Display/display.service /etc/systemd/system/display.service
+* 3.2 RELOAD DAEMON, ENABLE AND START THE SERVICE\